#include "blaswrap.h"
#include "f2c.h"

/* Subroutine */ int dgeev_(char *jobvl, char *jobvr, integer *n, doublereal *
	a, integer *lda, doublereal *wr, doublereal *wi, doublereal *vl, 
	integer *ldvl, doublereal *vr, integer *ldvr, doublereal *work, 
	integer *lwork, integer *info)
{
/*  -- LAPACK driver routine (version 3.0) --   
       Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,   
       Courant Institute, Argonne National Lab, and Rice University   
       December 8, 1999   


    Purpose   
    =======   

    DGEEV computes for an N-by-N real nonsymmetric matrix A, the   
    eigenvalues and, optionally, the left and/or right eigenvectors.   

    The right eigenvector v(j) of A satisfies   
                     A * v(j) = lambda(j) * v(j)   
    where lambda(j) is its eigenvalue.   
    The left eigenvector u(j) of A satisfies   
                  u(j)**H * A = lambda(j) * u(j)**H   
    where u(j)**H denotes the conjugate transpose of u(j).   

    The computed eigenvectors are normalized to have Euclidean norm   
    equal to 1 and largest component real.   

    Arguments   
    =========   

    JOBVL   (input) CHARACTER*1   
            = 'N': left eigenvectors of A are not computed;   
            = 'V': left eigenvectors of A are computed.   

    JOBVR   (input) CHARACTER*1   
            = 'N': right eigenvectors of A are not computed;   
            = 'V': right eigenvectors of A are computed.   

    N       (input) INTEGER   
            The order of the matrix A. N >= 0.   

    A       (input/output) DOUBLE PRECISION array, dimension (LDA,N)   
            On entry, the N-by-N matrix A.   
            On exit, A has been overwritten.   

    LDA     (input) INTEGER   
            The leading dimension of the array A.  LDA >= max(1,N).   

    WR      (output) DOUBLE PRECISION array, dimension (N)   
    WI      (output) DOUBLE PRECISION array, dimension (N)   
            WR and WI contain the real and imaginary parts,   
            respectively, of the computed eigenvalues.  Complex   
            conjugate pairs of eigenvalues appear consecutively   
            with the eigenvalue having the positive imaginary part   
            first.   

    VL      (output) DOUBLE PRECISION array, dimension (LDVL,N)   
            If JOBVL = 'V', the left eigenvectors u(j) are stored one   
            after another in the columns of VL, in the same order   
            as their eigenvalues.   
            If JOBVL = 'N', VL is not referenced.   
            If the j-th eigenvalue is real, then u(j) = VL(:,j),   
            the j-th column of VL.   
            If the j-th and (j+1)-st eigenvalues form a complex   
            conjugate pair, then u(j) = VL(:,j) + i*VL(:,j+1) and   
            u(j+1) = VL(:,j) - i*VL(:,j+1).   

    LDVL    (input) INTEGER   
            The leading dimension of the array VL.  LDVL >= 1; if   
            JOBVL = 'V', LDVL >= N.   

    VR      (output) DOUBLE PRECISION array, dimension (LDVR,N)   
            If JOBVR = 'V', the right eigenvectors v(j) are stored one   
            after another in the columns of VR, in the same order   
            as their eigenvalues.   
            If JOBVR = 'N', VR is not referenced.   
            If the j-th eigenvalue is real, then v(j) = VR(:,j),   
            the j-th column of VR.   
            If the j-th and (j+1)-st eigenvalues form a complex   
            conjugate pair, then v(j) = VR(:,j) + i*VR(:,j+1) and   
            v(j+1) = VR(:,j) - i*VR(:,j+1).   

    LDVR    (input) INTEGER   
            The leading dimension of the array VR.  LDVR >= 1; if   
            JOBVR = 'V', LDVR >= N.   

    WORK    (workspace/output) DOUBLE PRECISION array, dimension (LWORK)   
            On exit, if INFO = 0, WORK(1) returns the optimal LWORK.   

    LWORK   (input) INTEGER   
            The dimension of the array WORK.  LWORK >= max(1,3*N), and   
            if JOBVL = 'V' or JOBVR = 'V', LWORK >= 4*N.  For good   
            performance, LWORK must generally be larger.   

            If LWORK = -1, then a workspace query is assumed; the routine   
            only calculates the optimal size of the WORK array, returns   
            this value as the first entry of the WORK array, and no error   
            message related to LWORK is issued by XERBLA.   

    INFO    (output) INTEGER   
            = 0:  successful exit   
            < 0:  if INFO = -i, the i-th argument had an illegal value.   
            > 0:  if INFO = i, the QR algorithm failed to compute all the   
                  eigenvalues, and no eigenvectors have been computed;   
                  elements i+1:N of WR and WI contain eigenvalues which   
                  have converged.   

    =====================================================================   


       Test the input arguments   

       Parameter adjustments */
    /* Table of constant values */
    static integer c__1 = 1;
    static integer c__0 = 0;
    static integer c__8 = 8;
    static integer c_n1 = -1;
    static integer c__4 = 4;
    
    /* System generated locals */
    integer a_dim1, a_offset, vl_dim1, vl_offset, vr_dim1, vr_offset, i__1, 
	    i__2, i__3, i__4;
    doublereal d__1, d__2;
    /* Builtin functions */
    double sqrt(doublereal);
    /* Local variables */
    static integer ibal;
    static char side[1];
    static integer maxb;
    static doublereal anrm;
    static integer ierr, itau;
    extern /* Subroutine */ int drot_(integer *, doublereal *, integer *, 
	    doublereal *, integer *, doublereal *, doublereal *);
    static integer iwrk, nout;
    extern doublereal dnrm2_(integer *, doublereal *, integer *);
    static integer i__, k;
    static doublereal r__;
    extern /* Subroutine */ int dscal_(integer *, doublereal *, doublereal *, 
	    integer *);
    extern logical lsame_(char *, char *);
    extern doublereal dlapy2_(doublereal *, doublereal *);
    extern /* Subroutine */ int dlabad_(doublereal *, doublereal *), dgebak_(
	    char *, char *, integer *, integer *, integer *, doublereal *, 
	    integer *, doublereal *, integer *, integer *), 
	    dgebal_(char *, integer *, doublereal *, integer *, integer *, 
	    integer *, doublereal *, integer *);
    static doublereal cs;
    static logical scalea;
    extern doublereal dlamch_(char *);
    static doublereal cscale;
    extern doublereal dlange_(char *, integer *, integer *, doublereal *, 
	    integer *, doublereal *);
    extern /* Subroutine */ int dgehrd_(integer *, integer *, integer *, 
	    doublereal *, integer *, doublereal *, doublereal *, integer *, 
	    integer *);
    static doublereal sn;
    extern /* Subroutine */ int dlascl_(char *, integer *, integer *, 
	    doublereal *, doublereal *, integer *, integer *, doublereal *, 
	    integer *, integer *);
    extern integer idamax_(integer *, doublereal *, integer *);
    extern /* Subroutine */ int dlacpy_(char *, integer *, integer *, 
	    doublereal *, integer *, doublereal *, integer *), 
	    dlartg_(doublereal *, doublereal *, doublereal *, doublereal *, 
	    doublereal *), xerbla_(char *, integer *);
    static logical select[1];
    extern integer ilaenv_(integer *, char *, char *, integer *, integer *, 
	    integer *, integer *, ftnlen, ftnlen);
    static doublereal bignum;
    extern /* Subroutine */ int dorghr_(integer *, integer *, integer *, 
	    doublereal *, integer *, doublereal *, doublereal *, integer *, 
	    integer *), dhseqr_(char *, char *, integer *, integer *, integer 
	    *, doublereal *, integer *, doublereal *, doublereal *, 
	    doublereal *, integer *, doublereal *, integer *, integer *), dtrevc_(char *, char *, logical *, integer *, 
	    doublereal *, integer *, doublereal *, integer *, doublereal *, 
	    integer *, integer *, integer *, doublereal *, integer *);
    static integer minwrk, maxwrk;
    static logical wantvl;
    static doublereal smlnum;
    static integer hswork;
    static logical lquery, wantvr;
    static integer ihi;
    static doublereal scl;
    static integer ilo;
    static doublereal dum[1], eps;
#define vl_ref(a_1,a_2) vl[(a_2)*vl_dim1 + a_1]
#define vr_ref(a_1,a_2) vr[(a_2)*vr_dim1 + a_1]


    a_dim1 = *lda;
    a_offset = 1 + a_dim1 * 1;
    a -= a_offset;
    --wr;
    --wi;
    vl_dim1 = *ldvl;
    vl_offset = 1 + vl_dim1 * 1;
    vl -= vl_offset;
    vr_dim1 = *ldvr;
    vr_offset = 1 + vr_dim1 * 1;
    vr -= vr_offset;
    --work;

    /* Function Body */
    *info = 0;
    lquery = *lwork == -1;
    wantvl = lsame_(jobvl, "V");
    wantvr = lsame_(jobvr, "V");
    if (! wantvl && ! lsame_(jobvl, "N")) {
	*info = -1;
    } else if (! wantvr && ! lsame_(jobvr, "N")) {
	*info = -2;
    } else if (*n < 0) {
	*info = -3;
    } else if (*lda < max(1,*n)) {
	*info = -5;
    } else if (*ldvl < 1 || wantvl && *ldvl < *n) {
	*info = -9;
    } else if (*ldvr < 1 || wantvr && *ldvr < *n) {
	*info = -11;
    }

/*     Compute workspace   
        (Note: Comments in the code beginning "Workspace:" describe the   
         minimal amount of workspace needed at that point in the code,   
         as well as the preferred amount for good performance.   
         NB refers to the optimal block size for the immediately   
         following subroutine, as returned by ILAENV.   
         HSWORK refers to the workspace preferred by DHSEQR, as   
         calculated below. HSWORK is computed assuming ILO=1 and IHI=N,   
         the worst case.) */

    minwrk = 1;
    if (*info == 0 && (*lwork >= 1 || lquery)) {
	maxwrk = (*n << 1) + *n * ilaenv_(&c__1, "DGEHRD", " ", n, &c__1, n, &
		c__0, (ftnlen)6, (ftnlen)1);
	if (! wantvl && ! wantvr) {
/* Computing MAX */
	    i__1 = 1, i__2 = *n * 3;
	    minwrk = max(i__1,i__2);
/* Computing MAX */
	    i__1 = ilaenv_(&c__8, "DHSEQR", "EN", n, &c__1, n, &c_n1, (ftnlen)
		    6, (ftnlen)2);
	    maxb = max(i__1,2);
/* Computing MIN   
   Computing MAX */
	    i__3 = 2, i__4 = ilaenv_(&c__4, "DHSEQR", "EN", n, &c__1, n, &
		    c_n1, (ftnlen)6, (ftnlen)2);
	    i__1 = min(maxb,*n), i__2 = max(i__3,i__4);
	    k = min(i__1,i__2);
/* Computing MAX */
	    i__1 = k * (k + 2), i__2 = *n << 1;
	    hswork = max(i__1,i__2);
/* Computing MAX */
	    i__1 = maxwrk, i__2 = *n + 1, i__1 = max(i__1,i__2), i__2 = *n + 
		    hswork;
	    maxwrk = max(i__1,i__2);
	} else {
/* Computing MAX */
	    i__1 = 1, i__2 = *n << 2;
	    minwrk = max(i__1,i__2);
/* Computing MAX */
	    i__1 = maxwrk, i__2 = (*n << 1) + (*n - 1) * ilaenv_(&c__1, "DOR"
		    "GHR", " ", n, &c__1, n, &c_n1, (ftnlen)6, (ftnlen)1);
	    maxwrk = max(i__1,i__2);
/* Computing MAX */
	    i__1 = ilaenv_(&c__8, "DHSEQR", "SV", n, &c__1, n, &c_n1, (ftnlen)
		    6, (ftnlen)2);
	    maxb = max(i__1,2);
/* Computing MIN   
   Computing MAX */
	    i__3 = 2, i__4 = ilaenv_(&c__4, "DHSEQR", "SV", n, &c__1, n, &
		    c_n1, (ftnlen)6, (ftnlen)2);
	    i__1 = min(maxb,*n), i__2 = max(i__3,i__4);
	    k = min(i__1,i__2);
/* Computing MAX */
	    i__1 = k * (k + 2), i__2 = *n << 1;
	    hswork = max(i__1,i__2);
/* Computing MAX */
	    i__1 = maxwrk, i__2 = *n + 1, i__1 = max(i__1,i__2), i__2 = *n + 
		    hswork;
	    maxwrk = max(i__1,i__2);
/* Computing MAX */
	    i__1 = maxwrk, i__2 = *n << 2;
	    maxwrk = max(i__1,i__2);
	}
	work[1] = (doublereal) maxwrk;
    }
    if (*lwork < minwrk && ! lquery) {
	*info = -13;
    }
    if (*info != 0) {
	i__1 = -(*info);
	xerbla_("DGEEV ", &i__1);
	return 0;
    } else if (lquery) {
	return 0;
    }

/*     Quick return if possible */

    if (*n == 0) {
	return 0;
    }

/*     Get machine constants */

    eps = dlamch_("P");
    smlnum = dlamch_("S");
    bignum = 1. / smlnum;
    dlabad_(&smlnum, &bignum);
    smlnum = sqrt(smlnum) / eps;
    bignum = 1. / smlnum;

/*     Scale A if max element outside range [SMLNUM,BIGNUM] */

    anrm = dlange_("M", n, n, &a[a_offset], lda, dum);
    scalea = FALSE_;
    if (anrm > 0. && anrm < smlnum) {
	scalea = TRUE_;
	cscale = smlnum;
    } else if (anrm > bignum) {
	scalea = TRUE_;
	cscale = bignum;
    }
    if (scalea) {
	dlascl_("G", &c__0, &c__0, &anrm, &cscale, n, n, &a[a_offset], lda, &
		ierr);
    }

/*     Balance the matrix   
       (Workspace: need N) */

    ibal = 1;
    dgebal_("B", n, &a[a_offset], lda, &ilo, &ihi, &work[ibal], &ierr);

/*     Reduce to upper Hessenberg form   
       (Workspace: need 3*N, prefer 2*N+N*NB) */

    itau = ibal + *n;
    iwrk = itau + *n;
    i__1 = *lwork - iwrk + 1;
    dgehrd_(n, &ilo, &ihi, &a[a_offset], lda, &work[itau], &work[iwrk], &i__1,
	     &ierr);

    if (wantvl) {

/*        Want left eigenvectors   
          Copy Householder vectors to VL */

	*(unsigned char *)side = 'L';
	dlacpy_("L", n, n, &a[a_offset], lda, &vl[vl_offset], ldvl)
		;

/*        Generate orthogonal matrix in VL   
          (Workspace: need 3*N-1, prefer 2*N+(N-1)*NB) */

	i__1 = *lwork - iwrk + 1;
	dorghr_(n, &ilo, &ihi, &vl[vl_offset], ldvl, &work[itau], &work[iwrk],
		 &i__1, &ierr);

/*        Perform QR iteration, accumulating Schur vectors in VL   
          (Workspace: need N+1, prefer N+HSWORK (see comments) ) */

	iwrk = itau;
	i__1 = *lwork - iwrk + 1;
	dhseqr_("S", "V", n, &ilo, &ihi, &a[a_offset], lda, &wr[1], &wi[1], &
		vl[vl_offset], ldvl, &work[iwrk], &i__1, info);

	if (wantvr) {

/*           Want left and right eigenvectors   
             Copy Schur vectors to VR */

	    *(unsigned char *)side = 'B';
	    dlacpy_("F", n, n, &vl[vl_offset], ldvl, &vr[vr_offset], ldvr);
	}

    } else if (wantvr) {

/*        Want right eigenvectors   
          Copy Householder vectors to VR */

	*(unsigned char *)side = 'R';
	dlacpy_("L", n, n, &a[a_offset], lda, &vr[vr_offset], ldvr)
		;

/*        Generate orthogonal matrix in VR   
          (Workspace: need 3*N-1, prefer 2*N+(N-1)*NB) */

	i__1 = *lwork - iwrk + 1;
	dorghr_(n, &ilo, &ihi, &vr[vr_offset], ldvr, &work[itau], &work[iwrk],
		 &i__1, &ierr);

/*        Perform QR iteration, accumulating Schur vectors in VR   
          (Workspace: need N+1, prefer N+HSWORK (see comments) ) */

	iwrk = itau;
	i__1 = *lwork - iwrk + 1;
	dhseqr_("S", "V", n, &ilo, &ihi, &a[a_offset], lda, &wr[1], &wi[1], &
		vr[vr_offset], ldvr, &work[iwrk], &i__1, info);

    } else {

/*        Compute eigenvalues only   
          (Workspace: need N+1, prefer N+HSWORK (see comments) ) */

	iwrk = itau;
	i__1 = *lwork - iwrk + 1;
	dhseqr_("E", "N", n, &ilo, &ihi, &a[a_offset], lda, &wr[1], &wi[1], &
		vr[vr_offset], ldvr, &work[iwrk], &i__1, info);
    }

/*     If INFO > 0 from DHSEQR, then quit */

    if (*info > 0) {
	goto L50;
    }

    if (wantvl || wantvr) {

/*        Compute left and/or right eigenvectors   
          (Workspace: need 4*N) */

	dtrevc_(side, "B", select, n, &a[a_offset], lda, &vl[vl_offset], ldvl,
		 &vr[vr_offset], ldvr, n, &nout, &work[iwrk], &ierr);
    }

    if (wantvl) {

/*        Undo balancing of left eigenvectors   
          (Workspace: need N) */

	dgebak_("B", "L", n, &ilo, &ihi, &work[ibal], n, &vl[vl_offset], ldvl,
		 &ierr);

/*        Normalize left eigenvectors and make largest component real */

	i__1 = *n;
	for (i__ = 1; i__ <= i__1; ++i__) {
	    if (wi[i__] == 0.) {
		scl = 1. / dnrm2_(n, &vl_ref(1, i__), &c__1);
		dscal_(n, &scl, &vl_ref(1, i__), &c__1);
	    } else if (wi[i__] > 0.) {
		d__1 = dnrm2_(n, &vl_ref(1, i__), &c__1);
		d__2 = dnrm2_(n, &vl_ref(1, i__ + 1), &c__1);
		scl = 1. / dlapy2_(&d__1, &d__2);
		dscal_(n, &scl, &vl_ref(1, i__), &c__1);
		dscal_(n, &scl, &vl_ref(1, i__ + 1), &c__1);
		i__2 = *n;
		for (k = 1; k <= i__2; ++k) {
/* Computing 2nd power */
		    d__1 = vl_ref(k, i__);
/* Computing 2nd power */
		    d__2 = vl_ref(k, i__ + 1);
		    work[iwrk + k - 1] = d__1 * d__1 + d__2 * d__2;
/* L10: */
		}
		k = idamax_(n, &work[iwrk], &c__1);
		dlartg_(&vl_ref(k, i__), &vl_ref(k, i__ + 1), &cs, &sn, &r__);
		drot_(n, &vl_ref(1, i__), &c__1, &vl_ref(1, i__ + 1), &c__1, &
			cs, &sn);
		vl_ref(k, i__ + 1) = 0.;
	    }
/* L20: */
	}
    }

    if (wantvr) {

/*        Undo balancing of right eigenvectors   
          (Workspace: need N) */

	dgebak_("B", "R", n, &ilo, &ihi, &work[ibal], n, &vr[vr_offset], ldvr,
		 &ierr);

/*        Normalize right eigenvectors and make largest component real */

	i__1 = *n;
	for (i__ = 1; i__ <= i__1; ++i__) {
	    if (wi[i__] == 0.) {
		scl = 1. / dnrm2_(n, &vr_ref(1, i__), &c__1);
		dscal_(n, &scl, &vr_ref(1, i__), &c__1);
	    } else if (wi[i__] > 0.) {
		d__1 = dnrm2_(n, &vr_ref(1, i__), &c__1);
		d__2 = dnrm2_(n, &vr_ref(1, i__ + 1), &c__1);
		scl = 1. / dlapy2_(&d__1, &d__2);
		dscal_(n, &scl, &vr_ref(1, i__), &c__1);
		dscal_(n, &scl, &vr_ref(1, i__ + 1), &c__1);
		i__2 = *n;
		for (k = 1; k <= i__2; ++k) {
/* Computing 2nd power */
		    d__1 = vr_ref(k, i__);
/* Computing 2nd power */
		    d__2 = vr_ref(k, i__ + 1);
		    work[iwrk + k - 1] = d__1 * d__1 + d__2 * d__2;
/* L30: */
		}
		k = idamax_(n, &work[iwrk], &c__1);
		dlartg_(&vr_ref(k, i__), &vr_ref(k, i__ + 1), &cs, &sn, &r__);
		drot_(n, &vr_ref(1, i__), &c__1, &vr_ref(1, i__ + 1), &c__1, &
			cs, &sn);
		vr_ref(k, i__ + 1) = 0.;
	    }
/* L40: */
	}
    }

/*     Undo scaling if necessary */

L50:
    if (scalea) {
	i__1 = *n - *info;
/* Computing MAX */
	i__3 = *n - *info;
	i__2 = max(i__3,1);
	dlascl_("G", &c__0, &c__0, &cscale, &anrm, &i__1, &c__1, &wr[*info + 
		1], &i__2, &ierr);
	i__1 = *n - *info;
/* Computing MAX */
	i__3 = *n - *info;
	i__2 = max(i__3,1);
	dlascl_("G", &c__0, &c__0, &cscale, &anrm, &i__1, &c__1, &wi[*info + 
		1], &i__2, &ierr);
	if (*info > 0) {
	    i__1 = ilo - 1;
	    dlascl_("G", &c__0, &c__0, &cscale, &anrm, &i__1, &c__1, &wr[1], 
		    n, &ierr);
	    i__1 = ilo - 1;
	    dlascl_("G", &c__0, &c__0, &cscale, &anrm, &i__1, &c__1, &wi[1], 
		    n, &ierr);
	}
    }

    work[1] = (doublereal) maxwrk;
    return 0;

/*     End of DGEEV */

} /* dgeev_ */

#undef vr_ref
#undef vl_ref